Truck Restraint Repair in Reno & Sparks, NV
A truck restraint (vehicle restraint) holds the trailer against the dock so it cannot pull away or creep while forklifts are crossing the leveler. Send a repair request for powered or mechanical restraints at Reno and Sparks docks, and it is passed to an independent dock equipment service provider who confirms scope, timing and price.
Request truck restraint repair →
The rule behind it
29 CFR 1910.26(d) requires measures, such as wheel chocks or sand shoes, to prevent the transport vehicle from moving while employees are on the dockboard. Nevada OSHA enforces this in Reno and Sparks under the State Plan. When the restraint is out of service, the door still needs another measure, such as chocks, before loading continues.
Restraint types you can request service for
| Type | How it holds the trailer | Typical problems to report |
|---|---|---|
| Hook-style (ICC bar) restraint, powered | A motor- or hydraulic-driven hook engages the trailer's rear impact guard | Hook will not raise or engage, motor runs without movement, lights show wrong status |
| Hook-style restraint, mechanical | A manually operated hook or bar engages the impact guard | Bent arm, broken spring, will not stay engaged |
| Wheel-based restraint | Blocks a trailer wheel instead of the impact guard | Arm or barrier will not deploy, track damage |
| Communication lights and interlocks | Red/green lights inside and outside; some interlock the leveler or door | Lights wrong or dead, interlock preventing use |
What to include in the request
- Door number, restraint brand and model (from the carriage or control panel)
- What it does now: no movement, partial movement, wrong lights, physical damage
- Whether a trailer struck it, and photos
- Whether the leveler or door at that position also needs work
Related: dock leveler repair in Reno & Sparks · loading dock door repair · loading dock safety requirements in Nevada
Frequently asked questions
Does OSHA require a truck restraint?
OSHA 29 CFR 1910.26(d) requires measures, such as wheel chocks or sand shoes, to keep the truck, trailer or rail car from moving while employees are on the dockboard. A vehicle restraint is one way to meet that; wheel chocks are another. If your restraint is down, use chocks or another measure until it is repaired.
What is the difference between a truck restraint and a vehicle restraint?
Usually nothing. Both terms describe a device at the dock that holds the trailer in place, most often by hooking the trailer's rear impact guard (ICC bar) or by blocking a wheel.
Can the restraint be repaired if the brand is discontinued?
Often parts can still be found or adapted, but not always. Send the brand and model from the label or control panel, and the provider will say whether repair or replacement makes sense.
